GMP Pumps

GMP engine drive transfer pumps
Aussie GMP self priming centrifugal pumps are available with close coupled petrol or diesel engine drive for a wide range of applications. They come in a range of cast iron, zinc free bronze or 316 grade stainless steel configurations and are suitable for both high flow and high pressure tasks. The pumps feature flows to 2450 lpm and heads as high as 75 metres.

Petrol or diesel engine drive pumps under 10 HP all come with the choice of either recoil or electric start, brands used Honda, Yanmar, Kubota or Hatz air cooled diesel drive units.
View spec sheet (pdf - 456KB)  
GMP engine drive semi trash pumps
Aussie GMP self priming centrifugal engine drive semi trash pumps in 2”, 3” and 4” configurations, designed for pumping solid laden liquids in both high and low pressure operations, with flows available to 2600 lpm and heads to 35 metres.

Pumps feature big open impellers, non clog design, silicon carbide mechanical seal, stainless steel wear plate and large front opening port to permit cleaning without pipe work disconnection.
Available in cast iron and 316 grade stainless steel, these heavy duty pumps are suitable for a wide range of industrial and agricultural applications.
View spec sheet (pdf - 259KB)  
GMP electric drive transfer pumps
Heavy duty cast iron, self priming, centrifugal electric drive pumps with high pressure and flows available in a range of sizes from 1” through to 4”.

These pumps offer flows up to 2700 litres per minute and maximum heads of 30 metres, and are designed for industrial and agricultural tasks. Fitted with a heavy duty TEFC single or three phase electric motor with IP56 rating. Pumps are available in cast iron, stainless steel and zinc free bronze.
View spec sheet (pdf - 391KB)  
GMP electric drive high pressure transfer pumps
Heavy duty cast iron or bronze electric drive pumps are designed for high pressure applications, available in a range of sizes from 1½” through to 3”.
With flows up to 1220 litres per minute and maximum heads of 73 metres these pumps are powered by close coupled heavy duty TEFC motors, two pole design with IP56 rating. They self prime from 6 metre depths making them ideal for any heavy duty industrial, mining or agricultural process pump duty.
View spec sheet (pdf - 459KB)  
GMP electric drive semi trash pumps
Aussie GMP self priming centrifugal electric drive semi trash pumps in 2”, 3” and 4” configurations, designed for pumping solid laden liquids for high and low pressure operations.

Pumps feature big open impellers, non clog design, silicon carbide mechanical seal, stainless steel wear plate and large front opening port to permit cleaning without pipe work disconnection. Flows available to 2600 litres per minute and heads to 35 metres.

Available in cast iron, zinc free bronze and 316 grade stainless steel.
View spec sheet (pdf - 483KB)  
GMP hydraulic drive transfer pumps
Aussie GMP hydraulic drive pumps are ideal for mobile applications. They provide loads of power and real design flexibility. The range includes models in 2” and 3” and 4” in both high flow and high
pressure versions. Flows available to 2600 litres per minute and heads to 31 metres.

These hydraulic drive motor pumps can be operated in either closed centre or open centre hydraulic systems. Available in cast iron, zinc free bronze or 316 grade stainless steel.
View spec sheet (pdf - 258KB)  
GMP hydraulic drive semi trash pumps
Aussie GMP self priming centrifugal electric drive semi trash pumps in 2”, 3” and 4” configurations, designed for pumping solid laden liquid in both high and low pressure operations.

Pumps feature big open impellers, non clog design, silicon carbide mechanical seal, stainless steel wear plate and large front opening port to permit cleaning without pipe work disconnection. Flows available to 2250 litres per minute and heads to 30 metres.
View spec sheet (pdf - 480KB)  
GMP bare shaft transfer pumps
Aussie GMP bare shaft self priming centrifugal pumps designed for long coupling to electric motors, petrol or diesel engines, hydraulic or PTO drives. This extensive range is available in 1½”, 2”, 3” and 4” in a wide range of models providing excellent high pressure and high flow characteristics. The pumps offer flows to 2300 litres per minute and heads 77 metres.

Pumps will self prime from 6 metres and are available in a range of construction materials including cast iron, zinc free bronze, and 316 grade stainless steel. Available with a choice of Honda, Yanmar or Kubota diesel drives.
View spec sheet (pdf - 455KB)  
GMP bare shaft semi trash pumps
Aussie GMP bare shaft self priming centrifugal pumps designed for long coupling to electric motors, petrol or diesel engines, hydraulic or PTO drives. This extensive range is available in 1½”, 2”, 3” and 4” in a wide range of models providing excellent high pressure and high flow
characteristics. The pumps offer flows to 2300 litres per minute and heads 50 metres.

Pumps will self prime from 6 metres and are available in a range of construction materials including cast iron, zinc free bronze, and 316 grade stainless steel.
View spec sheet (pdf - 476KB)  
GMP diesel transfer pumps
This series of pumps is designed for systems requiring high flow i.e. dump truck or crawler tractor fast refuelling in the field. Available in 1” or 1½” configuration with 12 or 24 volt DC option for 1” versions. Got big plant to fill fast? These pumps will provide flows of up to 120 litres per
minute in DC drive, or 300 litres per minute in single or three phase AC drive versions.
View spec sheet (pdf - 190KB)  

RELIABLE PRODUCTS ... RELIABLE PEOPLE